You are here: Home > Fasteners > Studs, 140Ksi Ti > One Nut Studs
Sort By:
Page of 1
Bullet Nose Shock Mount ONS, 7/8" Thread Into Chassis Drag Link / Tie Rod 1/2"-20 ONS, 2.525" Overall Eagle Front Shock Mount ONS, 1" spacer
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64
Eagle Upper Front  Shock, 7/8” Thread-in ONS with 0.6” Spacer Lower Rear Shock Mount 1/2"-20 ONS, 0.85" w/Flange Lower Rear Shock Mount 1/2"-20 ONS, 1.1" chassis-side
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64
Lower Rear Shock Mount 1/2"-20 ONS, 1.1" w/Flange Mini-Sprint Shock ONS, 3/8"-24 Mini-Sprint Thread-in ONS, 3/8"-24
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64
ONS 1/2"-20 for Heim + 2.125" Through-Bolt ONS 1/2"-20 with 5/8” Threaded Side ONS 5/8"-18, 4.27" Overall Length
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64
Quick Release 1/2"-20 ONS, 2.140" Quick Release 1/2"-20 ONS, 2.75" Quick Release Lower Rear Shock Mount 1/2"-20 ONS, 1.10"
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64
Quick Release Shock Mount 1/2"-20 ONS, 7/8" Thread Into Chassis Shock Mount 1/2"-20 ONS, 2.09" Through-Bolt, 0.95" Spacer Shock Mount 1/2"-20 ONS, 2.75" Through-Bolt
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64
Shock Mount 1/2"-20 ONS, 3.63" Through-Bolt Shock Mount 1/2"-20 ONS, 7/8" Thread Into Chassis Ti-Treat Moly Paste Anti-Seize Compound
140Ksi, Machine-Finish Ti64 140Ksi, Machine-Finish Ti64 Ti64’s proprietary Anti-Seize Compound contains 60% MoS2 solids. Ti64 highly recommends using an anti-seize lubricant when using our Titanium products to avoid Galling. Galling is a form of wear caused by adhesion between sliding surfaces. When a material galls, some of it is pulled with the contacting surface, especially if there is a large amount of force compressing the surfaces together.